Intercooler water space cover for MAN D2866 LE405

19 parts

Cylinder screw M10X35-10.9-MAN183-B1 with hexagon socket06020944511MANAvailable for order7 days€2.97
Cylinder screw M10X70-10.9-MAN183-B1 with hexagon socket06020944518MANAvailable for order7 days€3.40
Cylinder screw M10X50-10.9-MAN183-PHR with hexagon socket06021910514MANAvailable for order7 days€8.29
Cylinder screw M10X110-10.9-MAN183-PHR with hexagon socket06021910523MANAvailable for order7 days€12.04
Drain plug AM18X1,5-CUZN06080970106MANAvailable for order7 days€4.64
Grip ring S8-ST-MAN183-B406710200616MANAvailable for order7 days€3.90
Union nut N-L8-C10C-MAN183-B106710304112MANMAN Union nut N-L8-C10C-MAN183-B1 06710304112Available for order7 days€4.04
Charge-air pipe soldered51094115082MANAvailable for order7 days€161.26
Bracket51095400008MANAvailable for order7 days€48.11
Intercooler seal51099050028MANAvailable for order7 days€163.64
Intercooler seal51099050029MANMAN Intercooler seal 51099050029Available for order7 days€329.21
Drain plug G1/2"-CUZN39PB351903100245MANAvailable for order7 days€12.64
Reducing union51981300378MANAvailable for order7 days€13.13
Hex shoulder stud06010149227MANAvailable for order7 days€3.66
Cover51095030030MANAvailable for order7 days€1,698.03
Bracket51095400038MANAvailable for order7 days€56.76
Cylinder screw with hexagon socket M10X90-10.9- MAN183-A3C06020990385MANAvailability on requestPrice on request
Pressure regulator51064016001MANAvailability on requestPrice on request
Cover assembly for intercooler51095037001MANAvailability on requestPrice on request

About intercooler water space cover for the MAN D2866 LE405

19 part numbers in this subcategory of intake syst / exhaust manifold for the MAN D2866 LE405. Quantities and fitment follow the manufacturer catalogue for this engine.

Covers that close the water side of the intercooler, as single covers, water space covers or a complete cover assembly, with intercooler seals, a gasket, brackets, a carrier and an intermediate plate. Brass drain plugs (G1/2" and M18 x 1.5) sit in the covers; a pressure regulator, a soldered charge-air pipe and a small pipe union with grip ring for 8 mm tube are on the drawing too.

The cover screws are 10.9 grade from 35 to 130 mm. Corrosion on a cover usually shows at the seal face, so check that face before deciding whether the seal alone will do.

Can’t find
the part?

We’ll find the best spare part options for you

Optional · PNG, JPEG, PDF, XLS, XLSX · max 10 MB
The serial number is on the type plate of your engine or transmission.Optional

We use it to check that the parts fit your engine or transmission.

How can we reach you? Email or phone, at least one