Crankcase for MAN D2862 LE463
50 parts · page 1 of 2
Assembly diagrams in this category
- air distributor pipe
- air intake air cleaner
- crankcase
- crankcase upper part mounting parts
- drive housing components
- engine seal set
- exhaust elbow
- exhaust manifold cover components
- flywheel housing
- fuel line return
- fuel prefilter mounting kit
- heat exchanger cooling water lines
- heat exchanger surge tank components
- hp pump
- Oil pressure sensor crankcase left
- oil sump deep
- oil sump drain plug
- oil sump oil return lines
- Pressure sensor intake system air intake
- raw water pump Raw water elbow
- sensors charge air system intercooler
- timing cover
- turbocharger oil return lines
Other subcategories of engine mounting, gearbox mounting, crankcase
Other categories of the D2862 LE463
About crankcase for the MAN D2862 LE463
50 part numbers in this subcategory of engine mounting, gearbox mounting, crankcase for the MAN D2862 LE463. Quantities and fitment follow the manufacturer catalogue for this engine.
Crankcases as bare castings and as assemblies, including replacement groups for 10- and 12-cylinder engines and coated V8 and V12 marine blocks, with the bearing caps, oil sprayer nozzles, camshaft bushes, core plugs and drain plugs that belong to the block.
Main bearing caps are machined together with the block and do not move between crankcases. Core-plug covers are X5CrNi18-10 stainless and listed by diameter (34.2 to 62.2 mm); drain plugs by thread, from M10x1 to M30x1.5. Camshaft bushes are listed by bearing position and in a sputtered version.
Can’t find
the part?
We’ll find the best spare part options for you
